Selector Lever Indicator Adjustment

Selector Lever Indicator Adjustment





1. Remove the 2 screws and the instrument panel lower steering column opening cover.





2. Remove the screws and the instrument panel opening cover reinforcement.
3. Rotate the gearshift lever clockwise until it bottoms out (1st gear), then rotate it counterclockwise 2 detents (D) position.
4. Hang a 1.4 kg (3 lb) weight on the gearshift lever.





5. Rotate the thumbwheel to center the selector lever indicator in the middle of the (D) position.
6. Remove the 1.4 kg (3 lb) weight.
7. Rotate the gearshift lever into each detent to verify that the selector lever indicator matches the selected range. Readjust, if necessary.





8. Install the instrument panel opening cover reinforcement.
^ Tighten to 12 Nm (9 ft. lbs.).





9. Install the instrument panel lower steering column opening cover.
^ Tighten to 12 Nm (9 ft. lbs.).