Seat Backrest Cover - Third Row

SEAT BACKREST COVER - THIRD ROW

Removal and Installation
1. Fold the backrest not being serviced down.
2. Release the backrest trim cover J-clip at the top of the trim cover by the head restraint.
- Pull the head restraint release strap through the backrest trim cover.

3. Remove the 2 head restraint-to-backrest frame bolts and remove the head restraint.
- To install, tighten to 25 Nm (18 lb-ft).

4. Remove 2 bolts and the hinge cover.
5. Remove 2 bolts and the latch cover.
6. Release the backrest trim cover lower J-clip.

7. CAUTION: Use care when separating the seat back trim cover from the hook and loop strip, or the hook and loop strip can be torn from the backrest foam pad.

Release the backrest trim cover side J-clips, hook and loop strips, invert and remove the backrest trim cover.

8. To install, reverse the removal procedure.