6R60 - Automatic Transaxle/Transmission
Diagnostic Trouble Code ChartsSpecial Tool:
Special Tool(s)
Begin with and correct all non-transmission related diagnostic trouble code (DTCs). Start with the U-DTC codes (communication link codes) then repair any transmission-related DTCs.
Limp-home mode is a default condition to protect the engine and transmission when a fault occurs. Limp-home mode depends on the actual gear the vehicle was in when the fault has occurred.
^ Gears 1-3 the limp-home default will be 3rd gear.
^ Gears 4-6 the limp-home default will be 5th gear.
The limp-home gear will be held until the vehicle is placed in R, P or the vehicle has been restarted. After these action(s) the vehicle will default to the limp-home mode of 3rd gear.
P0218-P0562:
P0563-P0605:
P0613-P0634:
P0641-P0657:
P0658-P0659:
P0667-P0701:
P0705-P0711:
P0712-P0713:
P0714-P0715:
P0716-P0717:
P0720-P0721:
P0722-P0723:
P0729-P0731:
P0781-P0782:
DTC P0783-P0784:
P0732-P0733:
P0734-P0735:
P0736-P0829:
P0960-P0962:
P0963-P0972:
P0973-P0974:
P0975-P0976:
DTC P0977-P0978:
DTC P0979-P0980:
DTC P0981-P0982:
DTC P0983-P0770:
DTC P0985-P0986:
DTC P1707-P1910:
DTC P1911-P0740:
DTC P2763-U0155:
DTC U0100-P0741:
Diagnostic Trouble Code Chart