Adhesives

Adhesives

Material





Adhesives are used in a variety of applications. Typical uses for adhesives include roof panels, door skins and quarter panels. Trim applications include body side mouldings, emblems, stationary glass and weatherstripping. Combination sealer/adhesives are also used. Surface preparation is critical to a high quality repair. Following the label instructions for the product is essential.

Work in a well-ventilated area and protect adjacent surfaces when working with adhesives. The use of eye protection and protective clothing is also recommended when working with adhesives. Carry out a trial fit, mark and align the surfaces before bonding the materials together.

Seam sealers and corrosion protection may be necessary once the adhesive(s) has cured, depending on the application. The following is a list of adhesives recommended for certain types of applications:

- Metal Bonding Adhesive - For bonding cold-rolled steel, galvanized steel, aluminum and correctly prepared E-coat. It is used for door skin and roof panel replacement and OEM structural adhesive replacement.
- Plastic Bonding Adhesive - For bonding a variety of plastics to plastics and plastics to primed, painted or E-coated metals. Also for general purpose bonding of trim components.
- Seam Sealer - Heavy-bodied, non-sag adhesive/sealer for use on: standing cosmetic seams, truck bed seams, tooled door skin seams and floor pans.
- Trim and Weatherstrip Adhesive - For use on body side moulding, emblems, trim, bumper impact strips and carpeting.
- Clear Silicone Rubber - Used for sealing water leaks, noise concerns, remounting trim and repairing torn weatherstripping.

NOTE: Ford Motor Company does not approve or recognize structural repair procedures using anything but genuine Ford parts.
Structural repairs (frames, rails, aprons and body panels) carried out using other than Ford Motor Company parts have not been tested. In addition, structural equivalence and corrosion protection cannot be assured.

Returning a vehicle to pre-accident condition can only be assured if repair procedures are carried out by skilled technicians using genuine Ford Motor Company parts and approved methods.

Structural component repair procedures approved by Ford using genuine parts have been validated through testing by Ford Motor Company engineers. Should alternative structural component repair procedures and/or parts be used, repairers should be aware of the potential liability they incur.

NOTE: The following illustrations identify structural adhesive locations.

Roof Panel





Cowl Side Panel

NOTE: LH shown, RH symmetrically opposite.






Cowl Panel - Top

NOTE: LH shown, RH symmetrically opposite.






B-pillar Outer to Inner

NOTE: View from left side inner edges.






Wheelhouse to Bodyside

NOTE: LH view shown.






Wheelhouse Inner and Rear Corner

NOTE: LH view shown.






Rear Floor Pan

NOTE: View from rear of vehicle rightside. Sheet metal removed for clarity.