Door Lock Cylinder: Service and Repair

DOOR LOCK CYLINDER







Removal and Installation

NOTE:
- When any new lock cylinder is installed, the door lock cylinders and ignition lock cylinder are installed as a set. This eliminates carrying an extra key which fits only 1 lock. If a new key is used, the new key code number is stamped on a metal tag attached to the key.
- Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.

1. Remove the exterior front door handle.
2. Remove clip and the door lock cylinder.
3. To install, reverse the removal procedure.