Exterior Mirror Glass

EXTERIOR MIRROR GLASS







Exploded View

Removal
1. Position the exterior rear view mirror glass to the full DOWN position.

2. NOTE: The mirror glass is hinged at the bottom of the motor.

Pry the top of the exterior mirror glass edge rearward from the mirror case.

3. If equipped, disconnect the electrical connector(s).
4. Lift the mirror glass upward to disconnect the hinge.

Installation
1. If equipped, connect the electrical connector(s).
2. Position the glass on the lower locating tabs.
3. Tilt the glass fully upward and, using the palm of the hand, press the glass in place on the exterior rear view mirror motor.