Seat Features

SEATS - FRONT

The front seats have the following features:
- Manual recline
- Manual lumbar (optional)
- Driver memory (optional)
- Manual horizontal adjustment
- Power horizontal, vertical front and rear tilt adjustments (optional)
- Heated seats (optional)
- Climate controlled seats (optional)
- Hi-back seats linked to cloth (standard on Freestar)
- Low-back seats linked to leather (optional)
- Seat side air bag (optional)
- Occupant classification sensor (OCS) (passenger seat only)
- Armrest on inboard side

Power adjustment of the seat may be accomplished with the seat control switch located on the outboard side of the seat.

SEATS - SECOND ROW







The second row seat has the following features:
- Manual recline
- Removable seating
- Bench is base
- Quad seats are high series
- Quad seats have optional 2-way manual horizontal adjustment
- Quad seats fold and tumble with 1 hand operation for EZ entry
- Bench has 2-way manual horizontal adjustment
- Bench has tip and slide with 1-lever operation for EZ entry
- Armrest on inboard and outboard side
- Quad seats have a serviceable seat riser strut that provides enhanced operation of the EZ entry feature. Refer to Seat - Exploded View, Second Row, Bucket Seat and Seat Cushion - Second Row, Bucket.

To remove second row seating, refer to the owner's literature.

SEATS - THIRD ROW







The third row seat has the following features:
- Three passenger seating positions
- Grocery hooks on rear of seat
- Stows-in-floor (SIF)
- Multi-position recliner
- Seat striker mounts to wheel house
- Adjustable latch striker. Refer to Seat - Third Row.

SEATS - HEATED
This system allows the electrical heating of the front seats on demand.

The components of the system are:
- the seat heater mats are located in the seat cushion and seat backrest.
- the heated seat module is located on the seat cushion frame bottom.
- the heated seat control switches are located in the electronic automatic temperature control (EATC) module.
- the temperature sensors are located within the cushion heater mats.

The heated seat system:
- will only operate with the ignition switch in RUN.
- will operate with battery voltage as low as 9 volts.
- will maintain a temperature automatically once it is selected.
- has a low and high setting.

SEATS - MANUAL LUMBAR SUPPORT
The manual front seat backrest lumbar is adjusted by a knob mounted on the inboard side of the seat backrest.

SEATS - MEMORY
This system allows automatic positioning of the driver seat, outside rearview mirrors and power adjustable pedals to 2 programmable positions. The memory seat control switch is located on the driver door.