Front

Front Disc Brake
The brake caliper is held in place using a brake caliper anchor plate bolted to the wheel knuckle. It uses a brake caliper locating and guide pin to allow the dual piston brake caliper to move as the brake pads wear.

The brake discs are a vented design. The brake discs are removed and installed with the brake caliper and anchor plate removed as an assembly.

The brake disc shield is mounted to the front wheel knuckle and is held in place by the front wheel hub and bearing bolts. It protects the front wheel bearings and inner surface of the brake disc from damaging road debris.

The brake pads are housed in the brake caliper anchor plate assembly and are of a non-asbestos organic composition.