Test I: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool

PINPOINT TEST I: THE RESTRAINTS CONTROL MODULE (RCM) DOES NOT RESPOND TO THE SCAN TOOL

I1-I3:

I3-I5:

Normal Operation
The RCM communicates with the scan tool through the International Standards Organization (ISO) 9141 communication network. Circuit 70 (LB/WH) provides the network connection to the RCM. The RCM shares the ISO 9141 network with the parking aid module, the LH power sliding door (PSD) module, the RH PSD module, and the power liftgate module. Voltage for the RCM is provided by circuit 937 (RD/WH). Circuit 1203 (BK/LB) provides ground.

Possible Causes
- Fuse
- Circuit 70 (LB/WH) open
- Circuit 937 (RD/WH) open
- Circuit 1203 (BK/LB) open
- RCM