Test O: The Auto-Unlock Does Not Operate Correctly

PINPOINT TEST O: THE AUTO-UNLOCK DOES NOT OPERATE CORRECTLY

O1-O5:

Normal Operation
The smart junction box (SJB) energizes the unlock relays based on input from the ajar switches and the vehicle speed signal. The SJB unlocks the doors when the following conditions are met:
- The ignition switch is in the ON position, all doors are closed, and the vehicle has been in motion at a speed greater than 20 km/h (12 mph).
- The vehicle has then come to a stop and the ignition switch is turned to the OFF or ACCY position.
- The driver door is opened within 10 minutes of the ignition switch being turned to the OFF or ACCY position.

The auto-unlock feature is cancelled if the doors are locked with the door lock control switch or the remote keyless entry (RKE) transmitter before the driver door is opened.

Possible Causes
- Programming
- Door ajar switches
- SJB