Auxiliary Blower Motor

AUXILIARY BLOWER MOTOR







Removal and Installation







1. Remove the bolts and the rear cargo management cover.







2. Remove the rear cargo management system.
1 Remove the screw.
2 Remove the pin-type retainer.
3 Remove the rear cargo management system.

3. Remove the access panel.
4. Remove the vent tube.
5. Disconnect the blower motor electrical connector.
6. Remove the 3 blower motor screws.
7. Remove the blower motor.
8. Remove the blower motor retainer.
9. Remove the blower motor wheel.
10. To install, reverse the removal procedure.