Front Door Window Glass: Service and Repair

WINDOW GLASS - FRONT DOOR

Part 1:

Part 2:

Exploded View

Removal and Installation
1. Remove the front door trim panel.
2. Remove the front door speaker.
3. Remove the interior moulding.
4. Remove the exterior mirror front door weather shield.
5. Disconnect the exterior mirror electrical connector.







6. Release the 3 door wiring harness pin-type retainers.
7. Remove the front door weather shield.

8. CAUTION: Make sure the holes in the glass bracket do not become enlarged during the rivet removal process. If the holes become enlarged, the new rivets may become loose, resulting in a clicking noise concern.

NOTE: Use a 4.5 mm (0.1772 in) drill bit to drill out the glass-to-regulator rivets.

Remove the 2 front door window glass-to-regulator rivets.
- Position the front door window glass as necessary to access the front door window glass-to-regulator rivets.







9. Remove the front window glass.
- Pull the glass out through the top inboard side of the door.

10. To install, reverse the removal procedure.