Steering Column Multifunction Switch

Steering Column Multifunction Switch

Steering Column Multifunction Switch:

Removal and Installation

CAUTION: Do not remove the ignition lock cylinder and the ignition switch at the same time or damage to the column can result.

1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the 2 screws and the steering column opening cover.





3. Remove the 3 screws and the upper and lower steering column shroud.
4. Disconnect the multi-function switch electrical connector.
5. Remove the 2 multi-function switch screws and the multi-function switch.
6. To install, reverse the removal procedure.