Retractable Running Board Step

RETRACTABLE RUNNING BOARD STEP







Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Extend the retractable running board.

3. CAUTION: An assistant is required to hold the retractable running board before removing the bracket-to-step screws.

Remove the 2 front and 2 rear bracket-to-step screws and the retractable running board step.
- To install, align the step approximately 5 mm (0.20 in) away from the mini-mudflap that hangs down from the front splash shield. Tighten the screws to 12 Nm (9 lb-ft).







4. To install, reverse the removal procedure.