Window Regulator - Rear

WINDOW REGULATOR - REAR

Part 1:

Part 2:

Exploded View







Removal and Installation
1. Remove the cab rear panel.
2. Position the insulator aside.
3. Remove the 8 window regulator cover bolts.
- To install, tighten to 10 Nm (89 lb-in).

4. Remove the window regulator cover to motor bolt.
- To install, tighten to 10 Nm (89 lb-in).

5. Remove the window regulator cover.
6. Remove the 2 window regulator mounting nuts.
- To install, tighten to 10 Nm (89 lb-in).

7. Remove the 2 window regulator to window bolts.
- To install, tighten to 11 Nm (8 lb-ft).

8. Disconnect the electrical connector.
9. Remove the window regulator.
10. To install, reverse the removal procedure.