Operation CHARM: Car repair manuals for everyone.

Repair and Diagnosis: Application and ID

IDENTIFICATION CODES

Vehicle Identification Number


Vehicle Identification Number (VIN) Tag Locator:






The vehicle identification number (VIN) is a 17-digit combination of letters and numbers. The VIN is stamped on a metal tab riveted on the instrument panel, top upper left of the dash. The VIN is also found on the vehicle certification (VC) label. If the VIN plate requires replacement, an authorized dealer must contact their respective regional office.







World Manufacturer Identifier:






The first 3 vehicle identification number (VIN) positions are the world manufacturer identifier.
- 1FM - Ford Motor Company, USA, multi-purpose vehicle (Ford)
- 4M2 - Ford Motor Company, USA, multi-purpose vehicle (Mercury)


Brake Type and Gross Vehicle Weight Rating (GVWR):






The fourth VIN position is the vehicle brake type and gross vehicle weight rating (GVWR) code, all vehicles use hydraulic brakes and driver and front passenger air bags.
- C - 4,001-5,000 pounds GVWR with side impact air curtains
- Y - 4,001-5,000 pounds GVWR without side impact air curtains


Line, Series and Body Type:






VIN positions 5 through 7 indicate the vehicle line, series and body type.
- U02 - Escape, XLS - front wheel drive (FWD)
- U03 - Escape, XLT - FWD
- U04 - Escape, Limited - FWD
- U29 - Mariner, Hybrid - FWD
- U39 - Mariner, Hybrid - all wheel drive (AWD)
- U49 - Escape, Hybrid - FWD
- U59 - Escape, Hybrid - AWD
- U81 - Mariner, Luxury Version - FWD
- U87 - Mariner, Premier Version - FWD
- U91 - Mariner, Luxury Version - AWD
- U92 - Escape, XLS - AWD
- U93 - Escape, XLT - AWD
- U94 - Escape, Limited - AWD
- U97 - Mariner, Premier Version - AWD


Engine Type:






The eighth VIN position is the engine type (displacement and number of cylinders).
- Z - 2.3L, 4-valve, in-line 4 cylinder
- 1 - 3.0L Modular, 6-cylinder, EFI, DOHC
- H - ATK-CYC, 2.3L, 4-valve PFI, in-line 4 cylinder, gas/electric (Hybrid)


Check Digit:






The ninth VIN position is a government-assigned, computer-generated check digit.


Model Year:






The tenth VIN position is the model year code.
- 8 - 2008


Assembly Plant:






The eleventh VIN position is the assembly plant code.
- K - Kansas City Assembly (Claycomo, Missouri)


Build Sequence:






VIN positions 12 through 17 are an alphanumeric code for the vehicle build sequence. This is also the vehicle serial and warranty number.
- A00001-F99999 - Escape
- J00001-L99999 - Mariner

Vehicle Certification (VC) Codes


Vehicle Certification (VC) Label Locator:






The upper portion of the vehicle certification (VC) label contains the manufacturer's name, the month and year of manufacture, the certification statement and the VIN. It also includes gross vehicle weight rating (GVWR). The VC label is located on the left-hand door jamb. The serial number can also be found on the engine block, transmission and frame.

If a vehicle requires replacement of the VC label and is 4 years old or less, an authorized dealer must submit the VIN to their respective regional office. The regional office will submit a web form to the assembly plant for the replacement label. Once the label has been printed, a representative from the regional office will deliver the label to the dealer and witness installation on the vehicle. If a vehicle is more than 4 years old and requires a replacement label, the dealer must submit a request to the Department of Motor Vehicles.







Exterior Paint:






Exterior paint codes may be listed as a 2-part code. The first set of characters identify the primary body color. The second set of characters (if applicable) identify the vehicle accent or 2-tone body color. All colors are base coat/clear coat

Exterior Color Codes
- G2 - Redfire
- G9 - Vista Blue
- LS - Light Ice Blue Metallic
- NH - Light Sage
- NZ - Kiwi Green
- T8 - Tungsten Silver
- T9 - Monterrey/Black Pearl Slate
- UA - Ebony
- YN - Silver Metallic
- YZ - Oxford White


Wheelbase:






- 103 - 103 inch (2,616 mm) wheelbase


Interior Trim:






Interior trim codes are listed as a 2-part code. The first character identifies the interior trim type. The second character identifies the interior trim color.

Interior Trim Type
- 1 - Base cloth seats - Escape
- 2 - High series cloth seats - Escape
- 4 - High series cloth seats - Mariner
- 5 - Leather seats - Escape
- 7 - Leather with suede inserts - Mariner
- 8 - Leather seats - Mariner

Interior Trim Color
- 9 - Charcoal
- C - Camel
- S - Stone


Tape/Paint Stripe:






Tape and paint stripe codes do not apply.


Radio Type:






- 8 - AM/FM stereo with CD changer and clock
- N - AM/FM stereo with CD changer and navigation system
- X - AM/FM stereo with CD changer (CDX6)
- Z - Electronic AM/FM stereo with CD player and clock


Axle Type:






- 96 - 2.93 axle ratio


Transmission Type:






- 3 - 5-speed manual
- 4 - 4-speed automatic
- H - CVT automatic, power split electronic (Hybrid)


Spring Code:






Spring codes are listed as a 2-part code. The first 2 characters identify the RH and LH front springs. The third and fourth characters identify the RH and LH rear springs.

Front Springs
- A - 5M64-5310-A (coil)
- B - 7L84-5310-B (coil)
- C - 7L84-5310-C (coil)
- E - 7L84-5310-E (coil)
- F - 7L84-5310-F (coil)
- G - 7L84-5310-G (coil)

Rear Springs
- A - 8L84-5726-A (leaf)
- B - 8L84-5726-B (leaf)
- C - 8L84-5726-E (leaf)
- H - 8M64-5726-A (leaf)

Powertrain Calibration Information


Powertrain Calibration Information:






NOTE: Powertrain calibration information is limited to a maximum of 5 characters per line on the vehicle certification (VC) label. Because of this, calibration identification consisting of more than 5 characters will wrap to the second line on the VC label.

Powertrain calibration information is printed in the lower right corner of the VC label. Only base calibration information is printed. Revision levels will not appear, however, they can be found in On Line Automotive Service Information System (OASIS).


Powertrain Calibration Information:






Model Year
- 1 - 2001
- 2 - 2002
- 3 - 2003
- 4 - 2004
- 5 - 2005
- 6 - 2006
- 7 - 2007
- 8 - 2008

Vehicle Line
- M1 - Escape/Mariner
- M6 - Escape/Mariner Hybrid gas/electric

Transmission
- 1 - Automatic transmission
- 2 - Manual transmission

Unique Calibration
The Emissions/CAFE/CO2 Compliance Department is responsible for assigning these calibration numbers. Unique calibration identifications are assigned to cover similar vehicles to differentiate tires, drive configurations, final drive ratios and other calibration-significant factors.

These 2 characters are chosen by the analyst to provide identifiable information unique to each calibration. For example, using the number 2 to denote a 2-valve engine versus using the number 4 to denote a 4-valve engine, offers an easily identifiable difference.

Fleet Code
- 0 - Certification (U.S. 4K, final sale in export markets)
- 1 - HDGE/Dyno
- 2 - Fast AMA, U.S.
- 3 - ADP, U.S.
- 4 - Not assigned
- 5 - Not assigned
- 6 - Evaporative emissions
- 7 - MACCA
- 8 - On-board diagnostics (OBD)
- 9 - Not assigned

Certification Region
- 5 - U.S. 50 states
- A - U.S. federal, including altitude, may include Canada and/or Mexico
- B - U.S. California, includes U.S. green states
- C - Canada
- D - China
- E - European Community (Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Portugal, Spain, Sweden, United Kingdom)
- F - Extended European Community (E plus Croatia, Czech Republic, Estonia, Hungary, Norway, Poland, Romania, Russian Federation, Slovakia, Slovenia, Switzerland, Yugoslavia)
- G - Gulf Cooperative Council (Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, UAE)
- H - Hong Kong
- J - Japan
- K - Korea
- L - Malaysia
- M - Mexico
- N - New Zealand
- P - Australia
- Q - South America (Brazil)
- S - Singapore
- T - Taiwan
- U - South America (unleaded fuel)
- V - Vietnam
- X - Rest of World (ROW)
- Y - Military
- Z - Israel

Revision Level (not printed on label)
- 91-99 - Hardware calibration levels
- 01-04 - Preliminary levels
- 00 - Job 1 production (initial calibration)
- 05-09 - Pre-job 1 revisions to calibrations
- 10-89 - Post-job 1 revisions to calibrations
- 0B - Durability test level
- BD - On-board diagnostics (OBD) intermediate level (pre-05)