Inspection and Verification

Inspection and Verification

1. NOTE: The vehicle should be road tested, if possible, to verify the customer concern. Some clutch conditions may be attributed to a misadjusted clutch pedal height, linkage or shift mechanism. These should be checked and corrected prior to attempting major disassembly procedures. Verify that the transaxle is filled to the correct level with the specified lubricant.

Verify the customer concern.
2. Visually inspect for obvious signs of mechanical damage.

Visual Inspection Chart

Visual Inspection Chart:

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the cause is not visually evident, verify the symptom and GO to Symptom Chart - Clutch Operation. Symptom Chart - Clutch Operation