Radio, Stereo, and Compact Disc: Service and Repair
AUDIO UNITAll Audio Units Except Navigation:
Navigation:
Removal and Installation
All audio units
1. Remove the middle instrument panel center finish panel.
2. Remove the 4 audio unit screws.
- To install, tighten to 2 Nm (18 lb-ft) (navigation).
- To install, tighten to 1 Nm (9 lb-ft) (all except navigation).
Navigation audio unit
3. Disconnect the antenna and electrical connectors.
All audio units except navigation
4. NOTE: Only carry out this step if installing a new audio unit.
Remove the 2 audio unit brackets.
All audio units
5. Remove the audio unit.
6. To install, reverse the removal procedure.