Exterior Mirror Glass

EXTERIOR MIRROR GLASS







Removal
1. Position the exterior mirror glass in the full down position.

2. WARNING: Place a shop towel between the hands and the exterior mirror glass for protection in case of glass breakage during mirror service. Failure to follow this instruction may result in serious personal injury.

Pull outward on the upper exterior mirror glass to release the locking tabs from the exterior mirror motor.







3. Position the exterior mirror glass down.







4. Remove the exterior mirror glass from the exterior mirror motor.
- Pull outward on the exterior mirror glass.
- If equipped, disconnect the electrical connectors from the exterior mirror glass.







Installation
1. If equipped, connect the electrical connectors to the mirror glass.
2. Install the lower exterior mirror glass onto the exterior mirror motor.
3. Position the exterior glass upward.

4. WARNING: Place a shop towel between the hands and the exterior mirror glass for protection in case of glass breakage during mirror service. Failure to follow this instruction may result in serious personal injury.

Place a hand against the back of the exterior mirror and a hand flat against the upper exterior mirror glass. Press the glass in place until it is fully seated.