Interior Rear View Mirror
INTERIOR REAR VIEW MIRRORSpecial Tool(s)
Special Tool(s):
Removal
1. CAUTION: Twisting the interior rear view mirror base from right to left may cause a stress fracture of the windshield.
If equipped, remove the wire cover.
2. If equipped, remove the compass by pulling downward on the rearmost edge of the compass.
3. If equipped, disconnect the auto-dimming mirror electrical connector.
4. Insert the special tool between the mirror mount and windshield bracket from the bottom.
5. Release the mirror mount from the windshield bracket by pulling the tool away from the windshield.
Installation
1. Slide the mirror mount over the windshield bracket from the top and adjust the mirror to the up position.
2. Using the special tool, press the mirror assembly downward along the windshield until the mount is fully seated onto the windshield bracket.
3. If equipped, connect the auto-dimming mirror electrical connector.
4. If equipped, install the compass and wire cover.