Headlamp: Service and Repair

HEADLAMP ASSEMBLY







Removal and Installation

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

1. Remove the front bumper cover.
2. Remove the 3 headlamp assembly bolts.
- To install, tighten to 4.8 Nm (42 lb-in).

3. Remove the headlamp assembly nut and the headlamp assembly.
- Disconnect the electrical connectors.
- To install, tighten to 4.8 Nm (42 lb-in).

4. To install, reverse the removal procedure.