Test L: The Turn Signal Lamps Are Always On
PINPOINT TEST L: THE TURN SIGNAL LAMPS ARE ALWAYS ONNormal Operation
The smart junction box (SJB) sends reference signals to the multifunction switch through circuit CLS20 (BN/BU) (LH turn input) and circuit CLS24 (BN/WH) (RH turn input). When the multifunction switch is switched to the LH or RH TURN positions, the voltage signal is routed to ground. When the SJB detects the multifunction switch in the LH or RH TURN position, the SJB sends voltage to the appropriate turn lamps.
DTC B2281 (Right Turn Switch Short to Ground) - is an on-demand DTC that sets when the SJB detects the RH turn signal switch input is short to ground.
DTC B2282 (Left Turn Switch Short to Ground) - is an on-demand DTC that sets when the SJB detects the LH turn signal switch input is short to ground.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Multifunction switch
- SJB
L1-L3:
