Connecting Rod, Engine

Connecting Rod
Bearing bore diameter 53.015-53.035 mm (2.0872-2.0879 in)
Bearing-to-crankshaft clearance 0.028-0.066 mm (0.001-0.0025 in)
Length (center-to-center) 138.06-138.14 mm (5.435-5.38 in)
Maximum allowed bend 0.038 mm per 25 (0.0014 per 0.984 in)
Maximum allowed twist 0.050 mm per 25 (0.0019 per 0.984 in)
Pin bore diameter 21.017-21.031 mm (0.827-0.828 in)
Side clearance 0.100-0.30 mm (0.0039-0.0118 in)
Clearance-to-pin
Service limit 0.035 mm (0.0013 in)
Standard 0.004-0.02 mm (0.0001-0.0007 in)