Test C: No Power In RUN

Pinpoint Test C: No Power in RUN
Refer to Vehicle/Diagrams, Power Distribution/SJB for schematic and connector information.

Normal Operation
When the ignition switch is placed in RUN, fused ignition voltage is sent to:
^ smart junction box (SJB) C2280a-3 along circuit CDC33 (VT/GN).
^ SJB C2280e-I along circuit CDC34 (WH/OG).
^ SJB C2208b-45 along circuit CDC34 (WH/OG).
^ fuse 35 (10A) in the battery junction box (BJB) along circuit CDC34 (WH/OG).

This pinpoint test is intended to diagnose the following:
^ Wiring, terminals or connectors
^ Ignition switch
^ SJB

C1:

C1 (Continued)-C3:

C4-C6: