Automatic Transmission/Transaxle: Adjustments

Transmission Range (TR) Sensor Adjustment

Special Tool(s):

1. Remove the battery and tray.

2. NOTE: Make sure the transaxle is in the NEUTRAL position.

Loosen the transmission range (TR) sensor bolts.





3. Using the special tool, align the TR sensor and tighten the bolts.
^ Tighten to 11 Nm (8 lb-ft).





4. Install the battery and tray.
5. Check for correct operation. The engine should start only in PARK or NEUTRAL. The reverse lamps should illuminate in the REVERSE position.