Exterior Moulding / Trim: Description and Operation

EXTERIOR TRIM

The exterior trim and ornamentation consists of:
- front fender wheel opening moulding.
- front door moulding.
- grille assembly.
- power running boards (if equipped).
- rear door moulding.
- rear quarter panel moulding.
- running boards.

If equipped, the power running boards (PRB) automatically move when the doors are opened to assist entering and exiting the vehicle.

The PRB feature may be enabled/disabled through the message center.

When the PRB is disabled (off), the PRB will immediately move to the stowed position regardless of the position of the doors.

When the PRB is enabled (automatic), the PRBs will extend when the doors are opened and return to the stowed position 2 seconds after the doors are closed or vehicle speed is greater than 8 km/h (5 mph).

When the PRB are manually set to the deployed position (out), they will return to the stowed position and (automatic) mode when the vehicle speed is greater than 8 km/h (5 mph).