Back Window Motor: Service and Repair
WINDOW REGULATOR MOTOR - REARExploded View
Removal and Installation
NOTE: The rear window regulator motor must be initialized when repairs are performed on any part of the power rear window system including when: the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window glass module is installed, and any operation in which grease or lubricants are applied to the power rear window system.
1. Remove the rear window glass regulator.
2. Remove the 3 window regulator motor bolts.
- To install, tighten to 4 Nm (35 lb-in).
3. Remove the window regulator motor.
4. To install, reverse the removal procedure.
- Initialize the rear window regulator motor. For additional information, refer to Window Motor Initialization - Rear. Testing and Inspection