60 Percent, Bench

SEAT CUSHION - SECOND ROW, 60 PERCENT, BENCH







Disassembly and Assembly
1. Remove the second row 60 percent seat of the 60/40 bench seat.
2. Remove the second row 60 percent bench seat backrest.
- To install, tighten to 40 Nm (30 lb-ft).

4. CAUTION: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam pad.

Release the J-clips, separate the hook-and-loop fasteners, remove the hog rings and the cushion trim cover.

5. Remove the cushion foam pad.
6. Remove 2 cushion pad supports.
7. To assemble, reverse the disassembly procedure.