Seat - Third Row

SEAT - THIRD ROW

Material

Material:

Cargo Management System:

Third Row Seat:

Removal and Installation

All seats
1. Remove the 2 pin-type retainers.
2. Remove the 2 bolts and the cargo management system.

Power fold seats
3. Separate any power fold seat wire harness pin-type retainers and disconnect the power fold seat motor electrical connectors.

All seats
4. Remove the 2 LH and 2 RH floor mounting bracket bolts.
- To install, apply threadlock and tighten to 20 Nm (15 lb-ft).

5. Remove the floor mounting bracket center front and rear nuts.
- To install, tighten to 40 Nm (30 lb-ft).

6. Remove the floor mounting bracket front bolt and child safety seat tether anchor.
- To install, apply threadlock and tighten to 40 Nm (30 lb-ft).

7. Remove the floor mounting bracket LH and RH nuts.
- To install, tighten to 20 Nm (15 lb-ft).

8. Remove the third row seat.
9. To install, reverse the removal procedure.
- When installing any seat-to-floor bolts or studs, apply threadlock.