Second Row, 40 Percent E-Z Entry
SEAT RECLINER - SECOND ROW, 40 PERCENT E-Z ENTRYExploded View
Second Row, 60 Percent E-Z Entry Backrest (Part 1):
Second Row, 60 Percent E-Z Entry Backrest (Part 2):
Second Row, 60 Percent, E-Z Entry Cushion (Part 1):
Second Row, 60 Percent, E-Z Entry Cushion (Part 2):
Second Row, 40 Percent E-Z Entry Backrest:
Second Row, 40 Percent, E-Z Entry Cushion (Part 1):
Second Row, 40 Percent, E-Z Entry Cushion (Part 2):
Second Row, Bucket, Backrest:
Second Row, Bucket, Cushion (Part 1):
Second Row, Bucket, Cushion (Part 2):
Second Row, 60 Percent Bench, Backrest:
Second Row, 60 Percent Bench, Cushion:
Second Row, 40 Percent Bench, Backrest:
Second Row, 40 Percent Bench, Cushion:
Removal
WARNING: Use care when the seat back frame is removed and when releasing the recliners from a backrest upright position. The recliners are spring-loaded, which may cause the recliner upper arms to fold with significant speed/force. Failure to follow this instruction may result in serious personal injury.
CAUTION: The recliner bolts must be tightened in sequence or recliner latches that do not lock in place or binding may occur.
Inboard and/or outboard recliners
1. Remove the second row, 40 percent E-Z entry seat from the vehicle.
2. Remove the second row, 40 percent E-Z entry seat backrest.
Outboard recliner
3. Remove 3 screws, recliner handle and outboard recliner outer cover.
4. Separate the outboard recliner.
- Remove the 2 outboard recliner-to-cushion frame bolts.
- NOTE: When pulling outboard recliner out, note keyed position of recliner release shaft as it may pull out of inboard recliner.
Pull out to release the outboard recliner from the recliner release shaft.
- Separate the outboard recliner.
5. Remove the outboard recliner inner cover.
6. Remove the outboard recliner.
1 Rotate the cable casing out of the outboard recliner.
2 NOTE: The cable ends are color coded/keyed to the levers.
Rotate the cable ends out of the outboard recliner levers.
3 Remove the outboard recliner.
Inboard recliner
7. Remove the 2 screws and inboard recliner outer cover.
8. Separate the inboard recliner.
- Remove the 2 inboard recliner-to-cushion frame bolts and the safety belt buckle.
- NOTE: When pulling the inboard recliner out, note keyed position of recliner release shaft as it may pull out of outboard recliner
Pull out to release the inboard recliner from the recliner release shaft.
- Separate the inboard recliner.
9. Remove the inboard recliner inner cover.
10. Remove the screw and separate the kneeling mechanism release cable pivot at the inboard recliner.
- Remove the inboard recliner.
Installation
Inboard and/or outboard recliners
1. If necessary, position the recliner release shaft onto the recliner release pivot stub of the recliner still attached to the seat.
Inboard recliner
2. Install the inboard recliner inner cover.
3. NOTE: The inboard recliner inner cover is removed for clarity.
Position the inboard recliner release pivot stub into the recliner shaft.
4. Install the 2 inboard recliner-to-cushion frame bolts.
- Tighten to 55 Nm (41 lb-ft).
5. Position the kneeling mechanism release cable pivot onto the inboard recliner and install the screw.
- Make sure to put the recliner pin through the cable pivot.
Outboard recliner
6. NOTE: The cable ends are color coded/keyed to the levers.
Position each keyed cable end to the outboard recliner lever and rotate into position.
- Install the cable casing to the outboard recliner.
7. Install the outboard recliner inner cover.
8. NOTE: The outboard recliner inner cover is removed for clarity.
Position the outboard recliner release pivot stub into the recliner shaft.
9. Install the 2 outboard recliner-to-cushion frame bolts.
- Tighten to 55 Nm (41 lb-ft).
Inboard and/or outboard recliners
10. Install the second row, 40 percent E-Z entry seat backrest.
11. Install the second row, 40 percent E-Z entry seat into the vehicle.
12. Cycle the backrest down and then back to the upright position. Make sure the inboard and outboard recliners simultaneously and securely lock in the upright position.