General Information

Engine

WARNING: Do not operate the engine with the hood open until the fan blade has been examined for possible cracks and separation. A damaged fan can separate during operation. Failure to follow this instruction may result in serious personal injury.

CAUTION: When repairing engines, all parts must be contamination free. If contamination/foreign material is present when repairing an engine, premature engine failure may occur.

NOTE: This information, steps and procedures may not be specific to your engine.

NOTE: If a component fails to meet the specifications, repair or install a new component as necessary.

This is general procedures and diagnosis and testing of the engine system, except for exhaust emission control devices, the diagnosis of which are covered in Computers and Control Systems.

The engine incorporates the following features:
^ a closed PCV system. For service, refer to Emission Control Systems.
^ an exhaust emission control system. For service, refer to Emission Control Systems.
^ an evaporative emission (EVAP) control system. For service, refer to Evaporative Emissions System.

Some engines incorporate a fail-safe cooling system.

The engine, fuel system, ignition system, emissions system and exhaust system all affect exhaust and emission levels and must be maintained according to the maintenance schedule. Refer to the scheduled Maintenance Guide.

Correct engine identification is required to order parts.

For complete vehicle and engine identification codes, refer to Vehicle/Application and ID.