Test B: No Power In ACC/Run

Pinpoint Test B: No Power in ACC/RUN
Refer to Vehicle/Diagrams, Power Distribution/SJB for schematic and connector information.

Normal Operation
When placed in ACC, the ignition switch provides voltage to the smart junction box (SJB) on circuit CDC33 (VT/GN). When placed in RUN, the ignition switch provides voltage to the SJB and the instrument cluster on circuit CDC34 (WH/OG).
^ DTC B1359 Ignition RUN/ACC Circuit Failure - If the SJB detects an open circuit, a short to voltage or a short to ground on the RUN/ACC circuit, DTC B 1359 will be set.

This pinpoint test is intended to diagnose the following:
^ Wiring, terminals or connectors
^ Ignition switch
^ SJB

B1-B2:

B2 (Continued)-B4:

B5: