Component Tests and General Diagnostics

SPEAKER WALK-AROUND TEST

NOTE: To enter the speaker walk-around test or audio control module (ACM) self-diagnostic mode, the audio system must be on and in radio tuner mode.

1. To enter the speaker walk-around test, simultaneously press preset buttons 3 and 6.
2. The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the ACM in the following sequence: RF, LF, LR, RR, and SUBWOOFER.
3. To exit the speaker walk-around test, turn the key OFF, turn the audio system off, or press preset button 1 for diagnostics.