Camshaft Bearing

Tighten the LH camshaft bearing cap bolts in the sequence shown in 2 stages.
Stage 1: Tighten to 10 Nm (89 lb-in).
Stage 2: Individually loosen and then tighten each camshaft bearing cap to 10 Nm (89 lb-in).





Tighten the RH camshaft bearing cap bolts in the sequence shown in 2 stages.
Stage 1: Tighten to 10 Nm (89 lb-in).
Stage 2: Individually loosen and then tighten each camshaft bearing cap to 10 Nm (89 lb-in).