Exhaust Manifold

RH Exhaust Maniflod

Install the 6 new exhaust manifold studs.
- Tighten to 12 Nm (106 lb-in).

NOTICE: Failure to tighten the catalytic converter nuts to specification before installing the converter bracket bolts will cause the converter to develop an exhaust leak.

NOTICE: Failure to tighten the catalytic converter nuts to specification a second time will cause the converter to develop an exhaust leak.

Install a new exhaust manifold gasket, the exhaust manifold and 6 new nuts.

Tighten the nuts in 2 stages in the sequence shown.

Stage 1: Tighten to 20 Nm (177 lb-in).

Stage 2: Tighten to 20 Nm (177 lb-in).






LH Exhaust Maniflod

Install the 6 new LH catalytic converter manifold studs.
- Tighten to 11 Nm (97 lb-in).

NOTICE: Failure to tighten the catalytic converter nuts to specification before installing the exhaust Y-pipe will cause the converter to develop an exhaust leak.

NOTICE: Failure to tighten the catalytic converter nuts to specification a second time will cause the converter to develop an exhaust leak.

Using a new gasket, install the LH catalytic converter and the 6 nuts. Tighten in 2 stages in the sequence shown.

Stage 1: Tighten to 25 Nm (18 lb-ft).

Stage 2: Tighten to 25 Nm (18 lb-ft).