Antenna - AM/FM

Antenna - AM/FM









Removal and Installation

1. Remove the antenna mast.

2. Using a suitable tool, remove the stanchion.

3. NOTE: Access the antenna cable connection behind the RH cowl side trim panel.

Disconnect the antenna cable from the antenna lead-in cable.





4. Release the antenna cable grommet from the vehicle body.

5. Remove the RH fender splash shield. For additional information, refer to Front End Body Panels Fender Splash Shield.

6. Remove the nut and the AM/FM antenna base.
- To install, tighten to 9 Nm (80 lb-in).

7. To install, reverse the removal procedure.