Component Tests

Steering System

Component Tests

Steering Linkage

1. With the vehicle in NEUTRAL, position it on a hoist. Refer to Jacking and Lifting Service and Repair.

2. Using hand force only, check the inner and outer tie rods for vertical and lateral movement in the tie-rod ball studs/sockets.
- If there is any lateral or vertical movement in the tie-rod ball studs/sockets (inner or outer), a new tie rod must be installed.

Steering Column Torsion Bar Test

1. Put the steering wheel straight ahead and position the vehicle on a hoist.

2. Raise the vehicle until the tires are several inches off the ground.

3. Start the vehicle and slightly turn the wheel to the right and remove hands.

4. If the steering wheel continues to turn on its own to the end stop, replace the steering column. Refer to Steering Column Steering Column.