Antenna - Satellite Radio

Antenna - Satellite Radio









Removal and Installation

1. Remove the RH A-pillar trim panel. For additional information, refer to Interior Trim and Ornamentation A-Pillar Trim Panel.

2. Remove the RH sun visor. For additional information, refer to the headliner exploded view in Interior Trim and Ornamentation Service and Repair.

3. Lower the front of the headliner enough to gain access to the satellite radio antenna electrical connector.

4. Remove the satellite radio antenna.
- Disconnect the electrical connector.

- Loosen the antenna bolt.
- To install, tighten to 5 Nm (44 lb-in).

- Compress the tabs and release the satellite radio antenna from the roof panel.

5. To install, reverse the removal procedure.