Section 7-Service Parts

The Ford Motor Company stocks replacement parts for all passenger car safety belt systems for which there is nominal demand without regard to the age of vehicle. Beyond this, in the interest of ensuring that the full protection of safety belts is available for all Ford owners, the Company will undertake to provide parts to service the belt system for any Company vehicle if it was originally equipped with safety belts.

Seat belt and shoulder assembly part numbers for specific applications can be identified by referring to Body Section 611 of the parts catalog. In general, these assemblies are available with black webbing only once the vehicle is beyond two years out of production. Part orders should be placed through the normal PDC system.

WARNING: WHEN REPLACING A SEAT BELT ASSEMBLY, BE SURE TO INSTALL A COMPLETE NEW ASSEMBLY (BUCKLE PORTION AND TONGUE PORTION TOGETHER) AS RECEIVED FROM FORD MOTOR COMPANY. DO NOT REPLACE ONE PART OF A SEAT BELT ASSEMBLY WITHOUT INSTALLING THE ENTIRE SEAT BELT ASSEMBLY. THIS WILL ASSURE THAT THE BUCKLE PORTION IS MANUFACTURED BY THE SAME MANUFACTURER AS THE TONGUE PORTION AND IS COMPATIBLE WITH IT. ALSO BE SURE THAT THE BELTS INSTALLED ARE INTENDED SPECIFICALLY FOR THE VEHICLE IN WHICH THEY ARE BEING INSTALLED.
QUICK REFERENCE PARTS LISTING FOR SEAT BELTS, COMFORT CLIPS, AND EXTENDERS

Extenders offer eight inches of additional length and can be used in all seating positions. It is necessary to ensure that the manufacturer of the extender being installed is the same as that identified on the seat belt assembly. Part numbers for comfort clips used in the 3-point system, seat belts, extenders are shown below.

Quick Reference Part Listing

Book Microfiche
Section Page Plate Row Column

Car
Seat Belt Extenders 1973-1979 611 2 F4 10 01
and Seat Belts 1973-1979 611 2 M4 9 56
1980- 611 1 F3 23 47
1980- 611 1 M3 23 47
Truck
Seat Belt Extenders 1973-1979 600 3 LT2 20 48
and Seat Belts 1980- 600 4 LT2 11 04

All Vehicles
Comfort Clips 1973-1979 600 8 F4 9 63