Recall - Emission Control System Modifications: Overview
88ford10
At Dealers By: Order as req'd -0- % of Parts Direct
At PDC By: Now Shipped to Dealers
Date in Owner Letter: Same
RECALL NUMBER 87E62
Date: March, 1988
To: All Ford and Lincoln-Mercury Dealers
Subject: Emissions Recall 87E62 - Recall of Certain 1983-Model 1.6 Liter EngineEquipped Vehicles for Emission Control System Modifications
VEHICLES INVOLVED
All 1983-Model Escort, Lynx and EXP vehicles manufactured at the Edison, St. Thomas, San Jose and Wayne Assembly Plants and equipped with the following 1.6L engine and calibration codes:
Calibration Codes Engine Codes
3-03C-R00 3F/3J-669-AA
3-03C-R09 3F/3J-669-AB
3-03C-R14 3F/3J-669-BC
3-03D-R01 DF-661-AC
3-04C-R00 DF-662-AA
3-04Q-R00 DJ-660-AA
DF-662-BB
DJ-660-BB
REASON FOR RECALL
Ford is voluntarily recalling the affected vehicles to help assure acceptable levels of exhaust emissions. This will be achieved by modifying the emission control system.
CARES/OASIS
The enclosed listing identifies involved units reported registered to owners in your dealership's area. Other eligible vehicles that may be brought to your dealership for this recall service should be corrected as promptly as possible. If the owner of an eligible vehicle does not have a Customer Notification and Dealer Claim Form (FCS-1864), please complete a blank Form 1864 and submit it via the Direct Warranty Entry (DWE) system for reimbursement.
VEHICLE ELIGIBILITY
To determine if a vehicle is eligible, you must utilize "CARES" (Computer Assisted Recall System) or "OASIS" (On-Line Automotive Service Information System).
DEALER OBLIGATION
Dealers are obligated to perform the recall service promptly following tender of the vehicles by the owners. It is important that you promptly report to your FPSD District Office any instance in which an owner will not allow you to complete this recall service because of objections to scheduling or for any other reason.
TECHNICAL INSTRUCTIONS
Refer to Attachment I
SPECIAL DECAL INSTRUCTIONS
All of the vehicles serviced under this recall will require a new Vehicle Emission Control Information (VECI) decal. Decals will be mailed directly to the owners of the affected vehicles. Each decal will have the vehicle identification number (VIN) of the vehicle printed on it.
In the event that an owner returns a vehicle without a decal, refer to the enclosed vehicle listing or Attachment I, Page 1, to determine the correct decal. Contact your FPSD District Office and provide the decal part number and the VIN.
PARTS ORDERING
Service parts required for this recall may be ordered through normal channels.
LABOR TIMES
Base Labor Time
Modify Emission Control System
and Attach Authorized Modifica-
tions and VECI Decals. . . . . . . . 0.4 Hr. Insert in Box "B" of Form 1864
Supplemental Labor Time (Additive to Above)
Reverse Air Hoses on Combination Air
Bypass and Air Control Valve on Manual
Transmission Vehicles. . . . . . . . . . . . . . . . . . 0.3 Hr.
Administrative Allowance . . . . . . . . . . . . . . . . 0.1 Hr.
The 0.1 hour administrative allowance must be added before inserting the total labor time in Box "B" of the Form 1864.
REPORTING COMPLETIONS
Only the Form 1864 will be accepted for reimbursement under this program. Upon completion of the required service, the Form 1864 must be completely filled out and signed by authorized dealer personnel.
CLAIM SUBMISSION
The claims must be entered through the Direct Warranty Entry (DWE) system. Dealers without DWE capability must mail the second copy of the Form 1864 for reimbursement. Should your dealership receive pre-printed Forms 1864 with a seven digit claim number, you must drop the first digit and enter only the last six digits. You must sight verify the claim number for accuracy. It is important that all claims be filed for all completed units so that you will be reimbursed and our records will show completion.
FPSD ASSISTANCE
Any problems encountered with this recall should be discussed with your FPSD Service Zone Manager.