Injector Wire Harness Colors - Manual Revision
83ford8Article No. 83-19-12
FUEL CHARGING ASSEMBLY (3.8L ENGINES) INJECTOR WIRE COLORS INCORRECTLY SHOWN IN WIRING DIAGRAM
FORD 1984 MUSTANG, T-BIRD, LTD WITH 3.8L ENGINE
LINCOLN-MERCURY 1984 CAPRI, COUGAR, MARQUIS WITH 3.8L ENGINE
CALIBRATIONS: All with C.F.I.
Figure 14:
Wire connections to the injectors are not shown correctly in the wiring book and should not be changed to agree with the book.
Due to the 3.8L CFI System being equipped with two E.G.O. sensors, the electrical connectors at the two injectors must not be interchanged.
Disregard the wire color coding described in the SVC wiring schematic on early units. To preclude possible rough, erratic engine operation, it is imperative when servicing or removing the connectors at the injectors that they be identified (marked) and installed in the same position as removed. Further, because of the color code mismatch, it is important that injector circuit connections be checked from pin location of (ten) pin connector, disregarding the color code.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"