Molded Wire Connector Assemblies - Service

84ford5

Article No. 84-21-10

WIRING - MOLDED WIRE CONNECTOR ASSEMBLIES - SERVICE


FORD 1984 ALL

LINCOLN-MERCURY 1984 ALL

LIGHT TRUCKS 1984 ALL

Three conditions may be encountered relating to the TFI module connector, manifold pressure sensor connector, and relay connectors. The first is that the terminal may not be fully installed into the connector prior to molding. The second is that the wire has broken in the terminal or adjacent to it. The third concern is a broken connector locking retaining tab.

Four (4) molded connectors with eight inch wire leads have been released for service of this concern.

Figure 12:

Figure 12 identifies the type of connector and application.
PART NUMBER PART NAME CLASS

E4AZ-12A209-A Wire Connector C
E4AZ-12A209-B Wire Connector C
E4AZ-12A209-C Wire Connector C
E3FZ-12A209-A Wire Connector C


OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"