Dealer Installed A/C - Engine Component Kit
84ford18Article No. 84-4-5
AIR CONDITIONING - DEALER INSTALLED ENGINE COMPONENT KIT
FORD
1984 LTD, THUNDERBIRD, MUSTANG
LINCOLN-MERCURY 1984 MARQUIS, COUGAR, CAPRI
When installing engine component kit E3DZ-19B969-A on subject 1984 vehicles, the power steering hose must be reworked as follows.
FIGURE 11:
^ Remove hold-down clamp at left-hand side rail.
^ Remove hose connection at power steering pump.
^ Using a Rotunda Tube Bender (021-00022) with a 1" radius or equivalent, carefully bend the metal tube portion 3/8" O.D. of the hose, as shown in View A, making sure not to kink any portion of the tube.
^ Relocate the hold-down clamp as shown in Figure 11, reconnect the hose at the power steering pump, and tighten fitting to 10-25 ft.lbs. When installed properly, the hose will not have any tight bends and will not contact the coolant recovery bottle.
^ Add power steering fluid as necessary, start engine, and check for leaks.
NOTE: If the power steering hose requires replacement, service hose E3SZ-3A719-B should be obtained.
PART NUMBER PART NAME CLASS
E3DZ-19B969-A A/C Engine Component Kit PA
E3SZ-3A719-B Power Steering Hose A
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"