Recall - Emission Control System Modification: Overview
89ford07
At Dealers By: Order as Req'd. 0 % of Parts Direct
Shipped to Dealers
At PDC By: Now
Date in Owner Letter: Same
RECALL NUMBER 88E72
Date: March, 1989
To: All 49-States Ford and Lincoln-Mercury Dealers
Subject: Emissions Recall 88E72 - Recall of Certain 1984 and 1985-Model 1.6 Liter Engine Equipped Vehicles for Emission Control System Modification
CARES/OASIS - YES LISTINGS - YES DEALERS TO RETURN REMOVED PARTS - NO SPECIAL CLAIM PREPARATION - YES
VEHICLES INVOLVED
All 1984 and 1985-Model 49-States Escort, Lynx and EXP cars manufactured at the Edison, Oakville, St. Thomas and Wayne Assembly Plants and equipped with the following 1.6L calibration codes:
1984-Model 1985-Model
Calibration Codes Calibration Codes
4-03A-R00 4-03A-R10
4-03F-R00 4-03F-R00
4-03K-R00/R10 4-03K-R10
4-04A-R14/R16 4-04A-R16
REASON FOR RECALL
Ford is voluntarily recalling the affected vehicles to help assure acceptable levels of exhaust emissions. This will be achieved by modifying the emission control system.
VEHICLE ELIGIBILITY
The enclosed listing identifies involved units reported registered to owners in your dealership's area. Other eligible vehicles that may be brought to your dealership for this recall service should be corrected as promptly as possible. If the owner of an eligible vehicle does not have a Customer Notification and Dealer Claim Form (FCS-1864), please complete a blank Form 1864 and submit it via the Direct Warranty Entry (DWE) system for reimbursement.
CARES/OASIS
To determine if a vehicle is eligible, you must utilize "CARES" (Computer Assisted Recall System) or "OASIS" (On-Line Automotive Service Information System).
DEALER OBLIGATION
Dealers are obligated to perform the recall service promptly following tender of the vehicles by the owners. It is important that you report to your FPSD District Office any instance in which an owner will not allow you to complete this recall service because of objections to scheduling or for any other reason.
TECHNICAL Refer to Attachment I.
INSTRUCTIONS
OWNER Refer to Attachment II.
NOTIFICATION
PARTS ORDERING
Service parts required for this recall may be ordered through normal order processing channels
Service Part
Number Description Class Dealer Price
D3DZ-12A091-B Valve, Vacuum Delay (# 2, Brown) AC $3.39
D3AZ-12A091-A Valve, Vacuum Delay (# 10, Yellow) AG 4.61
D5TZ-12A091-A Valve, Vacuum Delay (# 20, Green) BG 3.39
383003-S Connector, Straight (3/16" x 3/16") AG 0.32 a/
373846-S Connector, "T", Vacuum
(3/16" x 3/16" x 3/16") BR 1.29
382444-S Cap, Vacuum (3/16") BS 0.21 b/
DOPZ-12226-B Hose Vacuum (5/32"), 2-Inch Length AG 0.06 c/
18-Inch Length AG 0.54 c/
Form (FPS-8262) Decal, Authorized No Charge. Order on
Modifications - Weekly Stock Order
Pad
a/ Based on $1.60, Pkg. of 5
b/ Based on $2.11, Pkg. of 10
c/ Based on $16.43/50 ft-Roll
SPECIAL CLAIM FORM PREPARATION
The claim Form 1864 will not accommodate all of the part entries required for vehicle modification. Prepare each claim form as follows:
1st Line Entry
Insert part number D3DZ-12A091-B and the dealer price for that part.
2nd Line Entry
Insert "OSL" for the part number and the price totals of all of the remaining parts used for the modification. Note: There are three kits, depending on the engine calibration.
RETURN REMOVED PARTS
It is not necessary to return removed parts. Dispose of removed parts according to provisions of Warranty and Policy Manual.
LABOR TIMES
Base Labor Time
Modifying the Emission Control System, Install Authorized Modifications Decal, and Mark Existing Vehicle Emission Control Information (VECI) Decal
Kit Code A Vehicles . . . . . . . . . . . . . . . . . . . .0.4 Hr. Insert in Box "B" of Form 1864
Kit Code B Vehicles . . . . . . . . . . . . . . . . . . . .0.4 Hr. Insert in Box "B" of Form 1864
Kit Code C Vehicles . . . . . . . . . . . . . . . . . . . .0.5 Hr. Insert in Box "B" of Form 1864
Administrative Allowance Time (Additive to Above)
Administrative Allowance . . . . . . . . . . . . . . . . 0.1 Hr.
The 0.1 hour administrative allowance must be added before inserting the total labor time in Box "B" of the Form 1864.
REPORTING COMPLETIONS
Only the Form 1864 will be accepted for reimbursement under this program. Upon completion of the required service, the Form 1864 must be completely filled out and signed by authorized dealer personnel.
CLAIM SUBMISSION
The claims must be entered through the Direct Warranty Entry (DWE) system. Dealers without DWE capability must mail the second copy of the Form 1864 for reimbursement. Should your dealership receive pre-printed Forms 1864 with a seven digit claim number, you must drop the first digit and enter only the last six digits. You must sight verify the claim number for accuracy. It is important that all claims be filed for all completed units so that you will be reimbursed and our records will show completion.
REMEMBER THAT CLAIM FORMS FOR THIS RECALL REQUIRE SPECIAL PREPARATION. SEE "SPECIAL CLAIM FORM PREPARATION" SECTION ABOVE.
FPSD ASSISTANCE
Any problems encountered with this recall should be discussed with your FPSD Service Zone Manager.
Sincerely,