With Electronic Instrument Cluster (EIC)

1. Disconnect battery ground cable.
2. Remove four instrument panel lower trim cover attaching screws, then remove trim cover.
3. Remove steering column shroud.
4. Remove six instrument cluster trim panel attaching screws, then remove trim panel.
5. Remove four instrument cluster to instrument panel attaching screws.
6. Remove screw attaching transmission selector lever indicator cable bracket to steering column, then detach cable loop from pin on steering column.
7. Carefully pull cluster assembly away from instrument panel.
8. Disconnect speedometer cable and cluster feed plug and ground wire from cluster back plate, then remove cluster assembly.
9. Reverse procedure to install.