Rack and Pinion Steering Gear - New Design
84ford16Article No. 84-6-9
STEERING - POWER - TRW RACK & PINION - NEW PLASTIC PINION SERVICE
FORD 1983-1/2 AND LATER ESCORT, TEMPO, EXP
LINCOLN-MERCURY 1983-1/2 AND LATER LYNX, TOPAZ, LN7
The 1983-1/2 TRW power steering gear assembly incorporates a new plastic pinion cap with four notches for removal. The following procedure should be used to service this cap.
The tool required for removal of the new pinion plug is T83P-3504-AH and was supplied with the 1983-1/2 essential tool package.
The 1983-1/2 essential tool instruction manual includes a description and instructions for the new tool. An excerpt from this instruction manual is provided below:
FIGURE 9:
Engage the drive tangs of the Pinion Plug Spanner Wrench (T83P-3504-AH) into the notches of the pinion plug and use a ratchet or flex handle to remove the pinion plug as shown in Figure 9.
NOTE: Use extreme care to maintain full drive tang engagement.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"