| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| 4WD |
| Note |
| With AC, Add | 0.4 | 0.2 | | Includes R&R Cylinder Head & Oil Pan. Hone Cylinder Wall And Plastigage Bearings. |
| Without Turbo |
| One Cylinder | 8.5 | 6.1 | A | Includes R&R Cylinder Head & Oil Pan. Hone Cylinder Wall And Plastigage Bearings. |
| All Cylinders | 11.6 | 8.3 | A | Includes R&R Cylinder Head & Oil Pan. Hone Cylinder Wall And Plastigage Bearings. |
| Note |
| With AC, Add | 0.4 | 0.2 | | Includes R&R Cylinder Head & Oil Pan. Hone Cylinder Wall And Plastigage Bearings. |
| With Turbo |
| One Cylinder | 10.8 | 7.7 | A | Includes R&R Cylinder Head & Oil Pan. Hone Cylinder Wall And Plastigage Bearings. |
| All Cylinders | 13.9 | 9.9 | A | Includes R&R Cylinder Head & Oil Pan. Hone Cylinder Wall And Plastigage Bearings. |
| Note |
| With AC, Add | 0.4 | 0.2 | | Includes R&R Cylinder Head & Oil Pan. Hone Cylinder Wall And Plastigage Bearings. |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew |
| Without Turbo |
| Manual Trans | 2.3 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Auto Trans | 1.8 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| With Turbo | 2.4 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Crankshaft, Renew |
| Manual Trans |
| Without Turbo | 3.5 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| With Turbo | 4.5 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Auto Trans |
| Without Turbo | 3.6 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| With Turbo | 4.4 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Oil Pump, Renew |
| Without Turbo |
| Manual Trans | 1.4 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Auto Trans | 0.9 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| With Turbo | 1.5 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Rear Main Oil Seal, Renew |
| Manual Trans | 1.2 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Auto Trans | 1.3 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Tune-Up | 0.5 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |