Labor and Parts Information - Attachment II
ATTACHMENT IIEmission Recall 91E14
LABOR ALLOWANCE
^ Inspect the Exhaust System Catalyst (Service Part or Substrate Integrity Drilling); Prepare and Attach an Authorized Modifications Decal.
^ Inspection and Replacement of the Exhaust System Catalyst, Attachment of the Authorized Modifications Decal (Includes Time to Prepare Removed Catalysts for Return).
PARTS REQUIREMENTS
Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels.
Order One Drilling Kit For Each Vehicle Inspected
E8SZ-5Z212-AA Kit, Drilling Catalyst Substrate Integrity BG $2.20
The Following Heat Shields May Be Necessary - Order As Required
E8SZ-5E258-A Kit, Heat Shield - For 1988-Models
Having Toe-Board and Underbody Catalysts BG $51.38
E6SZ-5E258-A Kit, Heat Shield - For 1986/87-Models
Having Underbody Catalysts BG $20.61
Part prices are current until the next issue of the Master Price Book. For the latest price(s), call an Order Processing Center or check an updated Master Price Book or DOES II.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Parts and Service Division in accordance with Policy Procedure Bulletin 4000.
PARTS RETURN INSTRUCTIONS
REMOVED CATALYSTS MUST BE RETURNED.
REMOVE EXCESS WEIGHT FROM THE CATALYSTS BY CUTTING AND DISCARDING PIPES/FLANGES AS CLOSE TO THE CATALYST SHELL AS PRACTICAL.
THE FPS-700 PARTS DISPOSITION TAG WILL BE SENT TO YOU FOR EACH VEHICLE SERVICED. REFER TO WARRANTY AND POLICY MANUAL SECTION 7.0, PAGES 7 AND 10. HOLD REMOVED CATALYSTS UNTIL THE FPS-700 TAG IS RECEIVED.
FAILURE TO RETURN REMOVED CATALYSTS WILL RESULT IN CLAIM CHARGEBACK.
RETURN CATALYSTS VIA UNITED PARCEL SERVICE (UPS) TO THE ADDRESS ON THE FPS-700 TAG. CLAIM FOR PREPAID FREIGHT ON DWE USING FOPM 1863.
ANY QUESTIONS REGARDING THE HANDLING OF REMOVED CATALYSTS SHOULD BE RESOLVED WITH YOUR SERVICE ZONE MANAGER.