Steering - Alignment Specifications

86ford16

Article No. 86-11-13

ALIGNMENT SPECIFICATIONS - FRONT AND REAR


MERKUR 1985-86 XR4Ti

This information supplements the "Alignment Specifications" in Group 14 of the 1985-86 Merkur XR4Ti Shop Manual.

MERKUR XR4Ti ALIGNMENT SPECIFICATIONS

Steering Wheel Alignment (Clear Vision) +/- 5~.

Front

TOE 2.0 mm Toe-in +/- 1.0 mm 5/64" Toe-in +/- 3/64"
CASTER 1~ 58' +/- 1~
CAMBER -0~ 32' +/- 1~

Rear

TOE 0.8 mm Toe-in +/- 3.25 mm 3/64" Toe-in +/- 8/64"
CASTER N.A.
CAMBER

Maximum Side-to-Side
Ride Height* Acceptance Range Variation

350 to 359 mm -2~ 50' to -0~ 30'
360 to 369 mm -2~ 28' to -0~ 08'
370 to 379 mm -2~ 06' to +0~ 15'
380 to 389 mm -1~ 43' to 0~ 37' 1~ 0'
390 to 399 mm -1~ 21' to 1~ 00'
400 to 409 mm -0~ 58' to 1~ 22'
410 to 419 mm -0~ 36' to 1~ 45'
420 to 429 mm -0~ 13' to 2~ 07'

Figure 7:

Vehicle ride height is measured from the center of the wheel to the highest point on the wheel opening as shown in Figure 7.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

(Figure 7 on next page)