Recall - Auxiliary Rear Seat Belt Retractor Inspection: Overview

88ford19

PLEASE ENSURE THAT COPIES OF THIS BULLETIN ARE ROUTED TO YOUR PARTS AND SERVICE PERSONNEL


March, 1988

TO: Selected North American Ford and Lincoln-Mercury Dealers and Affiliated Ford Motor Companies

SUBJECT: Safety Recall 88S42 - Incorrect Auxiliary Rear Seat Belt Retractor Installation

VEHICLES AFFECTED

All 1987-1988 Ford Crown Victoria and Mercury Grand Marquis eight passenger station wagons equipped with optional auxiliary rear seats that were produced at the St. Thomas Assembly Plant from the start of 1987-model production through October 30, 1987.

REASON FOR THIS RECALL

The seat belt assembly for the auxiliary rear seat on the right side of the vehicle may not have been installed correctly. An improperly installed seat belt may cause the belt webbing to be pinched between the seat cushion and seat back. As a result, the belt may fit too loosely or may retract slowly.

To correct this condition, the affected seat belt on the subject vehicles is to be inspected and, if necessary, installed properly.

ATTACHMENTS Attachment I
- Administrative Information

Attachment II
- Labor Allowances
- Parts Ordering Information

Attachment III
- Technical Information